Calculator
Turning speed calculator
Enter the cutting speed recommended for your material and insert, the workpiece diameter and the feed per revolution to get the spindle speed and the feed rate.
How it works
The spindle speed follows from the cutting speed and the workpiece diameter. The feed rate is the feed per revolution multiplied by the spindle speed. As the diameter gets smaller during facing, the speed needed for the same cutting speed gets higher.
n = (Vc × 1000) / (π × D) Vf = f × n
Example
A 50 mm workpiece at a cutting speed of 200 m/min and a feed of 0.2 mm per revolution gives about 1273 rpm and a feed rate of about 255 mm/min.
Use the cutting data from your insert supplier for the material you turn. Limit the result to the maximum speed of the machine and of the chuck.