Calculator
Drilling speed calculator
Enter the cutting speed recommended for your drill and material, the drill diameter and the feed per revolution to get the spindle speed and the feed rate.
How it works
The spindle speed follows from the cutting speed and the drill diameter. The feed rate is the feed per revolution multiplied by the spindle speed. Larger drills need a lower speed for the same cutting speed.
n = (Vc × 1000) / (π × D) Vf = f × n
Example
A 10 mm drill at a cutting speed of 30 m/min and a feed of 0.15 mm per revolution gives about 955 rpm and a feed rate of about 143 mm/min.
Use the cutting data from your drill supplier for the material you drill. Use coolant and reduce the speed for deep holes.