Drilling machines range from bench units to radial and column machines for large parts. Match the machine to the hole size, the material and the size of the workpiece.

Drilling capacity

Check the maximum drill diameter in steel, not only in softer materials. Check the spindle taper and the stroke for the depth you need.

Column or radial

Column machines suit smaller parts that can be moved to the spindle. Radial machines move the spindle to the work, which is practical for large and heavy parts.

Table and reach

Compare the table size, the throat distance or arm reach and the height under the spindle with your workpieces.

Speed and feed

A wide speed range and power feed make it easier to drill different materials and sizes accurately.

Tapping and extras

If you tap holes, check whether the machine supports tapping. Consider a vice, clamping tools and coolant.

Drilling machines: frequently asked questions

What drilling capacity should I look for?

Choose the maximum drill diameter in steel, with some margin over the largest hole you need.

When do I need a radial drilling machine?

When the workpiece is too large or heavy to move easily. The arm lets you position the spindle over the hole instead.

Can a drilling machine tap threads?

Many can, with a tapping attachment or reversing function. Check the machine specification and tell us if you need tapping.

What spindle taper do I need?

It depends on the tool holders you use. Choose a taper that matches your drills and accessories.

Can I get a quote with accessories?

Yes. Tell us the accessories you need and we will include them in the offer.

request Not sure which machine suits you? Find the right machine