VMC1160L Vertical CNC Machining Center
- 1200 × 600 mm Table size
- 1100/600/600 mm X/Y/Z travel
- 800 kg Max table load
Vertical machining centers (VMC) with the spindle above the table, for plates, housings and single-sided parts. Our range covers tables from 900 × 400 mm to 1600 × 800 mm.
CNC machining centers (24) Collaborative robots (10) Conventional lathes (6) Drilling machines (5) Grinding machines (2) Hydraulic presses (2) Milling machines (17) Other machine tools (1) Sawing machines (2) Shearing machines (39)
In a vertical machining center the spindle points down at a table that holds the workpiece. It is the most common machine type in general machining because loading is easy and setups are quick.
The VMC models in the catalog start with a 900 × 400 mm table and X travel of 650 mm and go up to a 1600 × 800 mm table and 1500 mm X travel. Maximum table load grows from 400 kg to 1500 kg, and the spindle runs up to 8000 rpm. Most models use a BT40 spindle taper.
Take the largest part with its fixture. The part must fit within the X, Y and Z travels with room for the tool, and the part plus fixture must stay below the table load.
A BT40 spindle suits light and medium cutting at higher speed and is widely available as tooling. If your work needs heavy roughing in steel, compare the torque and the taper before you decide.
If you repeat parts that need several faces machined in one setup, a horizontal machining center may be more efficient. For very large or heavy parts, look at gantry machining centers.
Measure your largest workpiece including the fixture and choose a table and travels that cover it with some reserve. Our vertical models have tables from 900 × 400 mm to 1600 × 800 mm.
Most models in the range use BT40. The largest model is listed with BT40/BT50. Check the model page for the exact specification.
The maximum table load of our vertical models is between 400 kg and 1500 kg, depending on the model. Remember to count the fixture.
Yes. Send us the largest part size, weight, material and batch size, or use the Find the right machine form.
Request a quote Not sure which machine suits you? Find the right machine